White light electroluminescence from graphene‐enhanced single polymer comprising two color emitters of equal molar ratios

White polymeric light‐emitting diode (WPLED) based on a single polymer, poly(3‐hexylthiophene‐alt‐9,9‐dioctylfluorene) (PTAF), has been successfully demonstrated. This conjugated alternating copolymer, PTAF, comprises 50 mol % of 3‐hexylthiophene which is an orange‐red color chromophore and 50 mol % 9,9‐dioctylfluorene which is a bluish‐green color chromophore. It was synthesized by Suzuki cross‐coupling reaction and has a molecular weight of 15,021 and polydispersity of 1.36. Nanocomposite consisting PTAF and graphene nanosheets enhances the optoelectronic properties and the device fabricated with a configuration of ITO/PEDOT:PSS/(PTAF + 1% graphene)/Ca/Al shows two‐color white electroluminescence with CIE 1931 coordinates of (0.28, 0.34). The white luminescence from a single polymer affords the WPLED device a simple structure and low fabrication cost. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Aptamer-based fluorometric determination of norovirus using a paper-based microfluidic device

Microchimica Acta - The authors describe a rapid and highly sensitive point-of-care device for rapid determination of noroviruses, a leading cause of acute gastroenteritis. The assay is based on...     

Enantioselective Synthesis of a Chiral Coordination Polymer with Circularly Polarized Visible Laser

Circular dichroism is known to be the feature of a chiral agent which has inspired scientist to study the interesting phenomena of circularly polarized light (CPL) modulated molecular chirality. Although several organic molecules or assemblies have been found to be CPL‐responsive, the influence of CPL on the assembly of chiral coordination compounds remains unknown. Herein, a chiral coordination polymer, which is constructed from achiral agents, was used to study the CPL‐induced enantioselective synthesis. By irradiation with either left‐handed or right‐handed CPL during the reaction and crystallization, enantiomeric excesses of the crystalline product were obtained. Left‐handed CPL resulted in crystals with a left‐handed helical structure, and right‐handed CPL led to crystals with a right‐handed helical structure. It is exciting that the absolute asymmetric synthesis of a chiral coordination polymer could be enantioselective when using CPL, and provides a strategy for the control of the chirality of chiral coordination polymers.     

Facile synthesis of sulfenyl-substituted isocoumarins,heterocycle-fused pyrones and 3-(inden-1-ylidene)isobenzofuranones by FeCl3-promoted regioselective annulation of o-(1-alkynyl)benzoates and o-(1-alkynyl)heterocyclic carboxylates with disulfides

Reported herein is the FeCl₃-promoted intermolecular sulfoesterification of o-(1-alkynyl)benzoates with disulfides, which provides a convenient and efficient method for synthesis of 4-sulfenylisocoumarins. Various functional groups such as methoxy, halides, ester, cyano and silicon groups in the substrates are tolerated, and heterocycle-fused chalcogenylpyrones are also successfully achieved directly from the corresponding heterocyclic precursors under the same reaction conditions. In addition, starting from diynylbenzoate, this reaction sequence can be combined with a bicyclization step leading to the tetracyclic (E)-3-(2-phenyl-3-phenylchalcogenylinden-1-ylidene)isobenzofuranone frameworks with high regiospecificity and exclusive trans stereoselectivity.     

Li+掺杂对Y2SiO5:Pr3+上转换发光性能影响

采用溶胶-凝胶法制备Li+掺杂改性的Y2SiO5:Pr3+上转换发光材料,考察了Li+掺杂对样品晶型及发光性能的影响。采用XRD,DSC-TGA,FS对所制备的材料进行表征,结果表明Li+掺入浓度在7%～8%(摩尔分数)之间会引起Y2SiO5晶体类型由X1型转变为X2型,且Li+掺入后样品转晶型温度由950℃降至800℃;样品经800℃煅烧处理后以X1型Y2SiO5为主相,850℃煅烧处理后以X2型Y2SiO5为主相;Li+掺入同时会提高Y2SiO5:Pr3+材料的上转换发光强度,Li+最佳掺杂浓度为10%,对于双掺杂Pr3+,Li+:Y2SiO5体系中Pr3+最佳掺杂浓度为1.2%。     

季铵盐型螯合树脂的合成及其对铅离子的吸附研究

合成了一种含有季铵盐结构的希夫碱型螯合树脂(CPS-DMA-S-HCTA),研究了其对Pb(II)离子的吸附和脱附行为.树脂红外光谱分析和元素分析结果表明,成功合成了CPS-DMA-S-HCTA螯合树脂;树脂的热分析结果表明,CPS-DMA-S-HCTA树脂的初始分解温度为205℃,具有良好的热稳定性;静态实验结果表明,在研究的浓度范围内,吸附平衡数据符合Freundlich等温吸附方程,且吸附为放热、混乱度减小的自发过程,吸附过程以化学吸附为主,298 K,Pb(Ⅱ)溶液的初始浓度为600 mg/L时,适宜的吸附pH为5~6,平衡吸附量为96.1 mg/g,吸附达到平衡的时间约为10 min.采用1.5 mol/L的硝酸溶液作脱附剂,脱附率可达98%以上,解吸速率快,10 min左右流出液中重金属离子的浓度几乎为0 mg/L.经过10次吸附-解吸-吸附研究表明,树脂可重复使用性强.     

HT-7U超导托卡马克装置极向场线圈的等效弹性常数及其残余刚度

HT－7装置的超导极向场线圈由导管，超导材料和绝缘体组合而成，具有复杂的正交各向异性的性质。本文从微观力学的观点出发，将极向场线圈整体作为一种复合材料来考虑，采用微观力学的复合律和损伤力学的细观损伤模型，求出了极向场线圈的等效弹性常数和残余刚度；并且，残余刚度的计算结果已得到了实验验证。这些材料特性已被用于有限元分析的输入数据。     

弹性介质中圆柱壳动力响应研究的现状和展望

一、引言在地震动情况下,地下结构与地面结构相比较其动力响应是十分不同的。以桥梁和水堤为例,对这类结构的设计,水平惯性力是一个极为重要的因素。可是,对于地下结构,以埋管为例,惯性荷载主要由其周围的土介质所承受。地下管道系统的地震破坏,     

高质量高取向(100)面金刚石膜的可控性生长

应用微波等离子体化学气相沉积技术, 在低气压下对(100)晶面金刚石膜的表面形貌、质量、取向和生长率进行了可控性生长研究. 结果表明: 基片温度与甲烷浓度对(100)晶面金刚石膜的生长存在耦合规律. 为了获得表面形貌相似的(100)晶面金刚石膜, 在沉积过程中, 增加碳源浓度的同时需要同时升高基片温度; 当甲烷浓度为3.0%, 基片温度从740 ℃上升至1100 ℃ 的过程中, 金刚石膜的晶面取向变化可分为五个阶段, 其中当基片温度在860 ℃至930 ℃时, 很适合高取向(100)晶面金刚石膜生长; 另外, 金刚石膜的质量和生长速率分别与基片温度和甲烷浓度成正比. 为了获得高质量高取向(100)晶面金刚石膜, 应当选择合适的基片温度和甲烷浓度.